Casio fx-9860G AU - Angle Units

20050401
kk
kk
k Angle Units
To change the angle unit of an input value, first press K6(g)5(ANGL). On the
function key menu that appears, select “
°
”, “r”, or “g”.
•Be sure to specify Comp for Mode in the Setup screen.
Example Operation
To convert 4.25 rad to degrees: !m(SET UP)cccccc1(Deg)J
243.5070629 4.25K6(g)5(ANGL)2(r)w
47.3° + 82.5rad = 4774.20181° 47.3+82.5K6(g)5(ANGL)2(r)w
2°20⬘30⬙ + 39⬘30⬙ = 3°00⬘ 00⬙ 2K6(g)5(ANGL)4(° ’ ”) 204(° ’ ”) 30
4(° ’ ”)+04(° ’ ”)394(° ’ ”)304(° ’ ”)w
5(
° ’ ”
)
2.255° = 2°15⬘18⬙ 2.255K6(g)5(ANGL)6(g)3('DMS)w
2-4-3
Function Calculations
# Once you specify an angle unit, it remains in
effect until you specify a different one. The
specification is retained even if you turn
power off.