20050401
k Copying Data
You can copy data between main memory and storage memory.
u To copy from main memory to storage memory
Note
• The following procedure saves the selected data into a single file. You assign a name to
the file, which is stored in storage memory.
1. On the main memory data information screen, select the data you want to copy.
2. Press 2 (COPY).
• This displays the folder selection screen.
3. Select the folder to which you want to copy the data.
• This displays the file name input screen.
4. Input the file name you want to give to the file.
•To cancel the copy operation, press J.
5. Press w.
• This copies the data.
6. The message “Complete!” appears when the copy operation is complete. Pressing J
will return to the MEMORY mode initial screen.
12-7-8
MEMORY Mode
To Next Page
Loading...
Need help?
General
