20050401
u To select a range of cells
1. Move the cell cursor to the start cell of the range
you want to select.
2. Press !i(CLIP).
•This will cause the cell cursor to change from
highlighting to a thick-line boundary.
•As you move the cell cursor, the edit box will show
the range of cells that are currently selected.
3. Use the cursor keys to move the cell cursor to
the end cell of the range you want to select.
Selected cells are highlighted.
•To cancel cell selection, press J. If you do, the cell cursor will be located at the end
cell of the range you selected.
9-3-4
Basic Spreadsheet Screen Operations
#Pressing !i(CLIP) while an entire line is
selected, that line will be the selection range
start point. You can use the f and c
cursor keys to select additional lines.
#Pressing !i(CLIP) while an entire column
is selected, that column will be the selection
range start point. You can use the d and e
cursor keys to select additional columns.
To Next Page
Loading...
Need help?
General
