Casio fx-9860G AU - Working with Eactivity Files; Eactivity File Operations

20050401
10-2 Working with eActivity Files
This section explains the different file operations you can perform from the eActivity file list
screen.
k eActivity File Operations
u To create a new file
1. If you want to create the file in a specific folder, use f and c to highlight the folder
you want, and then press 1(OPEN) or w.
• If the eActivity workspace screen is displayed, press the J key to display the file
list. Then perform step 1.
10-2-1
Working with eActivity Files
Folder name
•You do not need to open a folder if you want to create the new file in the Storage
Memory root directory.
•For information about creating a new folder, see “Creating a Folder in Storage
Memory” (page 12-7-5).
2. Press 2 (NEW).
•This displays a dialog box for inputting a file name.
3. Enter up to eight characters for the eActivity file
name, and then press w.
•This displays a blank workspace screen.
•The following are the characters you can use in a file name:
A through Z, {, }, ’, ~, 0 through 9
Cursor