20050401
3. Press 1 (COPY) to copy the highlighted text to the clipboard, and exit the copy range
specification mode.
To cancel text highlighting without performing a copy operation, press J.
Math input mode
1. Use the cursor keys to move the cursor to the line you want to copy.
2. Press !i(CLIP) . The cursor will change to “ ”.
3. Press 1(CPY
•
L) to copy the highlighted text to the clipboard.
u To cut the text
1. Move the cursor (
I
) to the beginning or end of the range of text you want to cut and
then press !i(CLIP). This changes the cursor to “ ”.
2. Use the cursor keys to move the cursor and highlight the range of text you want to cut.
3. Press 2 (CUT) to cut the highlighted text to the clipboard.
The CUT operation is supported for the Linear input mode only. It is not supported for the Math
input mode.
1-3-6
Inputting and Editing Calculations
The selected characters are not changed
when you copy them.
Cutting causes the original characters
to be deleted.
To Next Page
Loading...
Need help?
General
