20070201
5. Press bw.
6. Enter the STAT mode to confi rm that TABLE mode column Y1 has been copied to List
1.
k Performing Scientifi c Function Calculations Using a List
Lists can be used just as numeric values are in scientifi c function calculations. When the
calculation produces a list as a result, the list is stored in ListAns Memory.
Example To use List 3
41
65
22
to perform sin (List 3)
Use radians as the angle unit.
sK1(LIST)1(List)dw
The resulting list
−0.158
0.8268
−8E−3
is stored in ListAns Memory.
In place of the K1(LIST)1(List)d operation in the above procedure, you could input
!*( { ) eb,gf,cc!/( } ).
Example To use List 1
1
2
3
and List 2
4
5
6
to perform List 1
List 2
This creates a list with the results of 1
4
, 2
5
, 3
6
.
K1(LIST)1(List)bM1(List)cw
The resulting list
1
32
729
is stored in ListAns Memory.
3-3-5
Arithmetic Calculations Using Lists
To Next Page
Loading...
