20070201
10-6-5
eActivity Guide
u To create a 1-key operation
The following operation assumes that you are continuing from the procedure under “To
create an n-key operation” (page 10-6-3).
1. On the operation pattern selection screen, press
2(1-KEY).
2. Press a key.
• Here we will press w.
• This will display a comment box.
w
(Executes the integration command.)
3. Input any comment text you want about the key operation sequence.
4. After inputting comment text, press w to register the 1-key operation input.
• This will return to the operation pattern selection screen. You can now edit the guide
by pressing 5(PLAY) and selecting the key operation you want to change.
See “Editing a Guide” (page 10-6-9) for details about editing guides.
To Next Page
Loading...
Need help?
General
