20070201
3-4-1
Switching Between List Files
3-4 Switching Between List Files
You can store up to 26 lists (List 1 to List 26) in each fi le (File 1 to File 6). A simple operation
lets you switch between list fi les.
u To switch between list fi les
1. From the Main Menu, enter the STAT mode.
Press !m(SET UP) to display the STAT mode Setup screen.
2. Use c to highlight “List File”.
3. Press 1(FILE) and then input the number of the list fi le you want to use.
Example To select File 3
1(FILE)d
w
All subsequent list operations are applied to the lists contained in the fi le you select (List File
3 in the above example).
To Next Page
Loading...
Need help?
General
