20070201
k Creating a Guide
u To enter the guide creation mode
1. On the eActivity workspace screen, select a strip and then press 6(g) to display
page two of the function menu.
• In this example we will select a Graph Editor strip.
2. Press 5(GUIDE).
• This will enter the guide creation mode and
display the operation pattern selection screen.
• {nKEYS} ... {creates an n-key operation}
• {1-KEY} ... {creates a 1-key operation}
• {AUTO} ... {creates an AUTO operation}
• {END} ... {exits the guide creation mode}
• {PLAY} ... {plays back recorded key operations}
You should also select this option when you want to select a recorded key
operation and edit it. PLAY does not appear if there are no key operations
recorded.
10-6-2
eActivity Guide
# If you press 5(GUIDE) while a strip you
selected already contains data is selected, a
confi rmation will appear asking whether you
want to delete the existing operation data.
1(Yes) ... Deletes the strip’s existing operation
data and starts guide creation from
an empty strip.
6(No) ... Cancels guide creation and returns
to the eActivity workspace screen.
To Next Page
Loading...
Need help?
General
