20070201
k t Tests
u t Test Common Functions
You can use the following graph analysis functions after drawing a t Test result output graph.
• 1(T) ... Displays
t score.
Pressing 1(T) displays the
t score at the bottom of the display, and displays the pointer at
the corresponding location in the graph (unless the location is off the graph screen).
Two points are displayed in the case of a two-tail test. Use d and e to move the pointer.
Press J to clear the
t score.
• 2(P) ... Displays p-value.
Pressing 2(P) displays the p-value at the bottom of the display without displaying the
pointer.
Press J to clear the p-value.
6-5-10
Tests
# The following V-Window settings are used for
drawing the graph.
Xmin = –3.2, Xmax = 3.2, Xscale = 1,
Ymin = –0.1, Ymax = 0.45, Yscale = 0.1
# Executing an analysis function automatically
stores the
t and p values in alpha variables T
and P, respectively.
To Next Page
Loading...
