20070201
*
1
[Save Res] saves each vertical column
of the table into its own list. The leftmost
column is saved in the specifi ed list, and each
subsequent column to the right is saved in
the next sequentially numbered list. Up to fi ve
lists can be used for storing columns. You can
specify an fi rst list number in the range of 1 to
22.
6-5-22
Tests
k ANOVA
ANOVA tests the hypothesis that the population means of the samples are equal when there
are multiple samples.
One-Way ANOVA is used when there is one independent variable and one dependent
variable.
Two-Way ANOVA is used when there are two independent variables and one dependent
variable.
Perform the following key operations from the statistical data list.
3(TEST)
5(ANOV)
The following is the meaning of each item in the case of list data specifi cation.
How Many .................... selects One-Way ANOVA or Two-Way ANOVA (number of
levels)
Factor A ........................ category list (List 1 to 26)
Dependnt...................... list to be used for sample data (List 1 to 26)
Save Res ...................... fi rst list for storage of calculation results (None or List 1 to
22)*
1
Execute ........................ executes a calculation or draws a graph (Two-Way ANOVA
only)
The following item appears in the case of Two-Way ANOVA only.
Factor B ........................ category list (List 1 to 26)
After setting all the parameters, use c to move the highlighting to “Execute” and then press
one of the function keys shown below to perform the calculation or draw the graph.
• 1(CALC) ... Performs the calculation.
• 6(DRAW) ... Draws the graph (Two-Way ANOVA only).
Calculation results are displayed in table form, just as they appear in science books.
To Next Page
Loading...
Need help?
General
