20070201
α
-1-2
Error Message Table
Message Meaning Countermeasure
Memory
ERROR
• Operation or memory storage
operation exceeds remaining
memory capacity.
• Keep the number of memories
you use within the currently
specifi ed number of memories.
• Simplify the data you are trying
to store to keep it within the
available memory capacity.
• Delete no longer needed data to
make room for the new data.
Argument
ERROR
• Incorrect argument specifi cation
for a command that requires an
argument.
• Correct the argument.
Dimension
ERROR
• Illegal dimension used during
matrix or list calculations.
• Check the matrix or list
dimension.
Range ERROR
1 Input of an improper V-Window
value.
2 V-Window range settings
exceeded when a graph is
redrawn.
3 Input of an improper value on
the range screen and use of that
value for execution.
4 The spreadsheet cell range was
exceeded by paste, recall, or
other cell operation.
1 Change the V-Window value so it
is within range.
2 Redraw using the proper settings.
3 Input a proper range value.
4 Repeat the procedure taking
care that the cell range is not
exceeded.
Condition
ERROR
• Execution of a calculation or
function before all conditions
required for execution are met.
• Check the conditions and make
any necessary corrections.
Non-Real
ERROR
• Calculation that produces a
complex number when Real is
specifi ed for the Complex Mode
setting on the Setup screen, even
though the argument is a real
number.
• Change the Complex Mode
setting to something other than
Real.
Complex
Number In List
• List containing complex number
used in a calculation or operation
for which complex number data is
invalid.
• Change all data in the list to real
numbers.
Can’t Solve!
Adjust initial
value or
bounds. Then
try again
• A Solve calculation could not
obtain a solution within the
specifi ed range.
• Change the specifi ed range.
• Correct the input expression.
To Next Page
Loading...
Need help?
General
