23
Quick Start Basics
. To turn on the camera
Open the camera.
This will automatically turn on the
camera (indicated by the operation lamp
lighting green) and enter the REC mode.
IMPORTANT!
• The camera will not start up if you
open it while it is being charged by a
computer. A USB connection will be
established between computer and
camera (page 18).
. To enter the REC mode and PLAY mode
. To turn off the camera
Close the camera.
• To conserve battery power, an Auto
Power Off function will turn off power
automatically if you do not perform
any operation for about five minutes.
Turning Power On and Off
To enter the
PLAY mode
In the REC mode, touch “ ” (PLAY).
To enter the
REC mode
In the PLAY mode, touch “ ” (REC).