91
Other Settings (Set Up)
“” (Menu) * Setup * Startup
Selecting “On” for Startup causes a built-in startup screen to appear on the monitor
screen whenever the camera is turned on.
“” (Menu) * Setup * Illumination
The LED lights when you turn on the camera and synchronized with the Selfie Timer
(page 37).
“” (Menu) * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Displaying a Startup Screen at Power On (Startup)
Specifying LED Light Operation (Illumination)
On
Lights when the camera is turned on and with the Selfie Timer
count.
Timer only Lights with the Selfie Timer count.
Startup only Lights when the camera is turned on.
Off
Does not light when the camera is turned on and with the
Selfie Timer count.
Formatting Built-in Memory or a Memory Card (Format)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
