26
Quick Start Basics
IMPORTANT!
• Never insert anything besides a supported memory card (page 24) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
. To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
IMPORTANT!
• Turn off the camera before replacing the memory
card.
• Never remove the memory card while the operation lamp is flashing green after
turn off the camera by closing its cover. Doing so can cause the image save
operation to fail and even damage the memory card.
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1. Load a memory card (page 25).
2. Open the camera to turn it on.
3. Touch “ ” (Menu).
4. Drag upwards and downwards until you find “Setup”, and then touch it.
5. Touch “Format”.
6. Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
To format (initialize) a new memory card
To Next Page
Loading...
Need help?
General
Weight and Dimensions
