certificate, and client private key should be provided on the gateway side.
Now, the gateway will connect to the AC automatically.
4. Trouble Shooting and Tips
The AC and gateway console will check the integrity & validity of the certificate and private
key. Please check chapter E.1 for the format requirement. If the local date and time are not
configured correctly (see chapter E.2.3 and E.3.1), the validity check will fail too.
If the gateway can’t connect to the AC, please double-check if you load the correct certificate
and private key. The user can set the Certificate Configuration back to Default to exclude any
other issues, e.g. transport issue.
The user can find TLS error logs in the gateway console Log tab.
To Next Page
Loading...
