Cattron MP96 Series User Manual

Cattron™ MP96/48 Series Portable Remote Control Systems
User Manual
32
68C-MP96/48-RD-EN
Version 006
4.15 MP96/MP48 – Feature Comparison
The Cattron MP Series of Portable Remote Control Systems is available in two configurations: the MP96 and the
MP48. The MP96 represents the top of the Cattron line. The MP48 Series offers the same dependability
required for operating machinery in harsh, industrial environments, but with fewer features.
The bulk of the information in this manual refers to both the MP96 and the MP48. However, as stated above, the
MP48 is equipped with fewer features than the MP96. A feature comparison of the two products can be found
below. Differences between the two systems are in bold type.
Features
MP96
MP48
OPERATION
Compatible with previous Cattron Systems
YES
YES
Solid State, Digitally Proportional/Analog, and Electromechanical interfacing
capabilities
YES
YES
Up to 48 inputs and 96 outputs allow for complete customization
YES
NO
Up to 16 inputs and 48 outputs allow for complete customization
YES
YES
Multiple operators may use a single frequency (RF version only)
YES
YES
Long ‘ride-through’ time during power supply interruptions
YES
YES
Optional Pitch and Catch feature available
YES
YES
‘Active’ Pitch and Catch must acknowledge
YES
NO
Optional Range Limiting
®
available
YES
YES
Optional Close Start
®
feature available
YES
YES
Responds rapidly to operator commands
YES
YES
Optional external event monitoring of machine functions
YES
LIMITED
LED indicator diagnostics for Receiver, Decoder, I/O modules
YES
YES
External data-logging of remote machinery activity
YES
NO
Simultaneous operators each controlling individual portion of the same
system
YES
NO
Supervisory operators can take control away (safety STOP, etc.)
YES
NO
Optional TALKBACK
®
feature available
YES
NO

Cattron MP96 Series Specifications

General

Brand	Cattron
Model	MP96 Series
Category	Control Systems
Language	English