Cattron MP96 Series - Page 81

Cattron™ MP96/48 Series Portable Remote Control Systems
User Manual
81
68C-MP96/48-RD-EN
Version 006
Display Line 1
Display Line 2
[MAIN5] OUTPUT OFF
[MAIN5] OUTPUTS DISABLED
[MAIN6] OUTPUT ON
[MAIN6] OUTPUTS ENABLED
[MAIN6] OUTPUT OFF
[MAIN6] OUTPUTS DISABLED
HARDWARE WATCHDOG TEST
[OPR1] OUTPUT
HARDWARE WATCHDOG TEST
[OPR2] OUTPUT
HARDWARE WATCHDOG TEST
[MAIN1] THROUGH [MAIN6]
WATCHDOG TIMEOUT FAILURE
[OPR1] - ERROR Fb
WATCHDOG TIMEOUT FAILURE
[OPR2] - ERROR Fs
WATCHDOG TIMEOUT FAILURE
[MAIN1]- [MAIN6] ERROR Fm
[OPR1] OUTPUT
ENABLE FAILED ONBOARD
[OPR2] OUTPUT
ENABLE FAILED ONBOARD
[MAIN1]-[MAIN6] OUTPUTS
ENABLE FAILED ONBOARD
[OPR1] OUTPUT FAILED
[ACTIVITY] ON - [OPR1]OFF
[OPR2] OUTPUT FAILED
[ACTIVITY] ON - [OPR2]OFF
LOOP FAULT [ACTIVITY] OFF
WHEN [OPR1] & [OPR2] ON
ASO FAULT [ACTIVITY] ON
WHEN [OPR1] & [OPR2] OFF
CODEPLUG VALUE INVALID
CHECK CODEPLUG
INTER-PROCESSOR
COMMUNICATIONS FAULT
RAM CHECK FAULT
CONTROL PROCESSOR
RAM CHECK FAULT
DATA PROCESSOR
COMMAND HAS BEEN ISSUED
TO CLEAR ALL ASO'S
*FAULT* -> ASO STAGE 2
HAS BEEN REACHED
PC DATALOG DOWNLOAD
HAS BEEN REQUESTED
PC DATALOG CLEAR
HAS BEEN REQUESTED
PRINT DATALOG DOWNLOAD
HAS BEEN REQUESTED
LOCAL DATALOG CLEAR
HAS BEEN REQUESTED
DATALOG WRITE ERROR
LOG ENTRY INVALID