Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
CENTA Antriebe Kirschey GmbH 12 / 52
3.3.1 Storage location
Requirements imposed on the storage location:
Moderately ventilated and low in dust
Dry (max. 65% humidity)
Temperature stabilized (-10°C to +25°C)
Free of ozone-producing devices such as light sources and electric motors
Free of UV light sources and direct sunlight
Do not store solvents and disinfectants, fuels or lubricants, acids, chemicals
etc. in the same location
For more details, refer to DIN 7716.
3.3.2 Storage of couplings / flexible elements
Unpack the parts.
Check the packaging for damage. Replace if necessary.
Check that the wax protection on steel components is intact. If necessary,
patch or renew.
Package the parts (for prolonged periods of storage, enclose desiccant and
weld into film).
Place the parts into storage.
3.4 Disposal
Ensure safe, environmentally responsible disposal of operating supplies
and exchange parts. For this, locally provided recycling facilities and
regulations must be utilized.
For disposal, the coupling parts must be separated where possible and sorted
according to material type.
To Next Page
Loading...