Centa CENTAX-G - Connecting the Rubber Element (1.1) and the Membrane

52 pages

Save Page as PDF

To Next Page

To Previous Page

Assembly and operating instructions

CENTAX-G

020G-00050…00090-F.10

M020-00009-EN

Rev. 4

CENTA Antriebe Kirschey GmbH 40 / 52

6.13 Connecting the rubber element (1.1) and the membrane

Fig. 6-14 Connecting the rubber element (1.1) and the membrane

Fig. 6-15 Detail X

Main Page

Table of Contents2
CENTAX-G Rev4
General Remarks6
Safety7
Safety Remarks7
Signal Words7
Pictograms8
Qualification of Deployed Personnel8
Intended Application8
Application Not in Compliance with the Intended Use10
Delivery, Transport, Storage and Disposal11
Delivery11
Transport11
Storage11
Storage Location12
Storage of Couplings / Flexible Elements12
Disposal12
Technical Description13
Characteristics13
Specifications13
Alignment of the Units Being Connected14
Axial Alignment15
Radial Alignment16
Angular Alignment18
Mounting20
General Assembly Instructions20
Mounting Overview22
Mounting the Hub (3; if Existing)24
Mounting the Hub with Cylindrical Bore and Keyway24
Mounting the Hub with Conical Oil Interference Fit26
Mounting the Adapter (17; if Existing)29
Aligning the Units29
Positioning the Membrane (1.2.1)30
Positioning the Ring (1.4) Inside the Rubber Element (1.1)31
Mounting the Rubber Element and the Adapter31
Mounting the Pre-Mounted Rubber Element (F) to the Flywheel32
Mounting the Rubber Element (1.1), the Ring (20; if Existing) and the Adapter (4) to the Flywheel33
Positioning the Rubber Element (1.1) and the Ring (1.4)33
6.10.2 Mounting the Adapter (4) to the Flywheel34
Mounting the Rubber Element (1.1) and the Ring (20; if Existing) to the Adapter (4)35
Mounting the Ring (1.4)37
Mounting the Membrane (1.2.1)37
Mounting the Membrane (Coupling Sizes 0005038
Mounting the Membrane (Coupling Sizes 0007839
Connecting the Rubber Element (1.1) and the Membrane40
After Completed Mounting41
Operation42
Operating Faults, Root Causes and Remedy42
Admissible Overall Misalignment of the Coupling42
Care and Maintenance43
Work to be Performed43
Cleaning the Coupling43
Visual Inspection of the Coupling43
Visual Inspection of the Rubber Elements / Rubber Segments43
Inspection of the Screw Connections43
Replacing Defective Parts43
Dismantling44
General Dismantling Instructions44
Disconnecting the Rubber Element (1.1) and the Membrane45
Dismantling the Membrane (1.2.1)45
Dismantling the Membrane of the Coupling Sizes 0005045
Dismantling the Membrane of the Coupling Sizes 0007845
Dismantling the Ring (1.4)45
Dismantling the Rubber Element and the Adapter46
Dismantling the Pre-Mounted Rubber Element (F)46
Dismantling the Rubber Element (1.1), the Ring (20; if Existing) and the Adapter (4)46
Dismantling the Rubber Element (1.1) and the Ring (20; if Existing) from the Adapter (4)46
Dismantling the Adapter (4) from the Flywheel46
Removing the Rubber Element (1.1) with the Ring (1.4)47
Removing the Ring (1.4)47
Dismantling the Membrane (1.2.1)47
Dismantling the Adapter (17; if Existing/ Necessary)47
Dismantling the Hub (3; if Existing/Necessary)47
9.11.1 Dismantling the Hub with Cylindrical Bore and Keyway47
9.11.2 Dismantling the Hub with Conical Oil Interference Fit48
Reassembling the Coupling49
Wearing and Spare Parts50
Annex51
CENTA Data Sheet D013-013 (Lubricated Screw Connections)51
CENTA Data Sheet D020-900 Declaration of Incorporation According to the EC Machinery Directive 2006/42/EC52

Centa CENTAX-G - Connecting the Rubber Element (1.1) and the Membrane

Table of Contents