Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
CENTA Antriebe Kirschey GmbH 13 / 52
4 Technical description
4.1 Characteristics
CENTAX-SEC series G couplings have the following excellent characteristics:
Sufficient elasticity to take up axial, radial and angular misalignment,
movements, installation errors and heat expansion in units with rigid or
elastic bearings.
High torsional elasticity with linear curve. One or more elements with
different shore hardnesses can be used in series, in which case the necessary
torsional rigidity for optimal vibration behaviour of the unit can be ensured.
All sides of the rubber element are ventilated all round in order to guarantee
good heat dissipation and high heat capacity.
High dynamic capacity and balancing quality.
Simple, cost-effective design with compact dimensions, low weight and mass
moment of inertia.
Wear free, low maintenance, simple to install. In all the series, the elements
can be replaced radially – without having to move the connected machine
components. Suitable dimensioning of bolts and clamping forces for torque
transmission by friction.
Available with or without failsafe device.
4.2 Specifications
The specifications can be found in the catalogue and the dimensions in the
installation drawing.
To Next Page
Loading...