Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
CENTA Antriebe Kirschey GmbH 7 / 52
2 Safety
The purpose of these operating instructions is to enable users to:
use the coupling safely and correctly
maximize efficiency
ensure that care and maintenance are carried out correctly
For this reason, these operating instructions must be thoroughly read and
understood prior to work on and with the coupling.
Injury and material damage can occur as a result of:
Failure to adhere to the safety and accident prevention regulations
valid at the relevant installation site
The safety and accident prevention regulations valid at the installation
site in question must be adhered to when performing any of the tasks
described in these operating instructions.
2.1 Safety remarks
In these operating instructions, safety remarks are indicated by a pictogram and
a signal word.
2.1.1 Signal words
The following signal words are used in the safety remarks:
Denotes the immediate threat of danger.
If not prevented, fatal or extremely serious injuries can result.
Denotes a potentially dangerous situation.
If not prevented, fatal or extremely serious injuries can result.
Denotes a potentially dangerous situation.
If not prevented, minor injuries and/damage to property may result.
Denotes application tips and particularly useful information. This is not
a signal word denoting a dangerous or damaging situation.
To Next Page
Loading...