Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
CENTA Antriebe Kirschey GmbH 2 / 52
Contents
1 General remarks ..................................................................................... 6
2 Safety ..................................................................................................... 7
2.1 Safety remarks .................................................................................. 7
2.1.1 Signal words ......................................................................... 7
2.1.2 Pictograms ............................................................................ 8
2.2 Qualification of deployed personnel ...................................................... 8
2.3 Intended application ........................................................................... 8
2.4 Application not in compliance with the intended use ..............................10
3 Delivery, transport, storage and disposal ............................................. 11
3.1 Delivery ...........................................................................................11
3.2 Transport .........................................................................................11
3.3 Storage ...........................................................................................11
3.3.1 Storage location ....................................................................12
3.3.2 Storage of couplings / flexible elements ...................................12
3.4 Disposal...........................................................................................12
4 Technical description ............................................................................ 13
4.1 Characteristics ..................................................................................13
4.2 Specifications ...................................................................................13
5 Alignment of the units being connected ................................................ 14
5.1 Axial alignment .................................................................................15
5.2 Radial alignment ...............................................................................16
5.3 Angular alignment.............................................................................18
6 Mounting .............................................................................................. 20
6.1 General assembly instructions ............................................................20
6.2 Mounting overview ............................................................................22
6.3 Mounting the hub (3; if existing) ........................................................24
6.3.1 Mounting the hub with cylindrical bore and keyway ...................24
6.3.2 Mounting the hub with conical oil interference fit .......................26
6.4 Mounting the adapter (17; if existing) .................................................29
6.5 Aligning the units ..............................................................................29
6.6 Positioning the membrane (1.2.1) .......................................................30
6.7 Positioning the ring (1.4) inside the rubber element (1.1) ......................31
6.8 Mounting the rubber element and the adapter ......................................31
6.9 Mounting the pre-mounted rubber element (F) to the flywheel ...............32
To Next Page
Loading...