Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
CENTA Antriebe Kirschey GmbH 3 / 52
6.10 Mounting the rubber element (1.1), the ring (20; if existing) and the
adapter (4) to the flywheel ................................................................33
6.10.1 Positioning the rubber element (1.1) and the ring (1.4) .............33
6.10.2 Mounting the adapter (4) to the flywheel .................................34
6.10.3 Mounting the rubber element (1.1) and the ring (20; if
existing) to the adapter (4) ....................................................35
6.11 Mounting the ring (1.4) .....................................................................37
6.12 Mounting the membrane (1.2.1) .........................................................37
6.12.1 Mounting the membrane (coupling sizes 00050…00075) ............38
6.12.2 Mounting the membrane (coupling sizes 00078…00090) ............39
6.13 Connecting the rubber element (1.1) and the membrane .......................40
6.14 After completed mounting ..................................................................41
7 Operation.............................................................................................. 42
7.1 Operating faults, root causes and remedy ............................................42
7.2 Admissible overall misalignment of the coupling ...................................42
8 Care and maintenance .......................................................................... 43
8.1 Work to be performed .......................................................................43
8.1.1 Cleaning the coupling ............................................................43
8.1.2 Visual inspection of the coupling .............................................43
8.1.3 Visual inspection of the rubber elements / rubber segments .......43
8.1.4 Inspection of the screw connections ........................................43
8.2 Replacing defective parts ...................................................................43
9 Dismantling .......................................................................................... 44
9.1 General dismantling instructions .........................................................44
9.2 Disconnecting the rubber element (1.1) and the membrane ...................45
9.3 Dismantling the membrane (1.2.1) .....................................................45
9.3.1 Dismantling the membrane of the coupling sizes
00050…00075 ......................................................................45
9.3.2 Dismantling the membrane of the coupling sizes
00078…00090 ......................................................................45
9.4 Dismantling the ring (1.4) ..................................................................45
9.5 Dismantling the rubber element and the adapter ..................................46
9.6 Dismantling the pre-mounted rubber element (F) .................................46
9.7 Dismantling the rubber element (1.1), the ring (20; if existing) and
the adapter (4) .................................................................................46
9.7.1 Dismantling the rubber element (1.1) and the ring (20; if
existing) from the adapter (4) ................................................46
9.7.2 Dismantling the adapter (4) from the flywheel ..........................46
9.7.3 Removing the rubber element (1.1) with the ring (1.4) ..............47
9.8 Removing the ring (1.4) ....................................................................47
9.9 Dismantling the membrane (1.2.1) .....................................................47
To Next Page
Loading...