Centa CENTAX-G - Dismantling; General Dismantling Instructions

Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
M020-00009-EN
Rev. 4
CENTA Antriebe Kirschey GmbH 44 / 52
9 Dismantling
9.1 General dismantling instructions
Any work method which impairs the safety of the coupling is prohibited.
The user undertakes to notify the manufacturer immediately of any changes
occurring at the coupling which could impair safety (address see chapter 1).
IMPORTANT
The coupling is dismantled in reverse order to the assembly process.
Please refer to the illustrations in chapter 6.
WARNING
Injuries can occur as a result of:
 Contact with rotating parts
Before starting work at the coupling, switch off the plant and secure
against unintentional start-up.
WARNING
Injury and material damage can occur as a result of:
 Dismantling of the coupling in the wrong sequence
Only ever dismantle the coupling in the described sequence.
WARNING
Injury and material damage can occur as a result of:
 Falling coupling components
Secure coupling components against falling to the floor.
CAUTION
Material damage to coupling components can occur as a result
of:
 Contact with sharp-edged objects
Protect coupling components for transportation.
Only hoist coupling components with nylon belts or ropes.
Always cushion parts when supporting them from below.
IMPORTANT
Use suitable lifting devices for dismantling.