Centa CENTAX-G - Page 21

Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
M020-00009-EN
Rev. 4
CENTA Antriebe Kirschey GmbH 21 / 52
CAUTION
Material damage to coupling components can occur as a result
of:
 Anaerobic adhesives (e.g. Loctite) used for screw locking
This type of screw locking medium may not be in contact with rubber
parts.
IMPORTANT
 Screw preparation and tightening torque levels in accordance with
CENTA data sheet D013-013 (see chapter 11.1).
 Use suitable lifting devices for assembly.
 The following assembly stages are described for coupling 020G-00070-F.10.
 Part illustration and marking may differ slightly from installation drawing and
delivery state.