Centa CENTAX-G - Page 36

Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
M020-00009-EN
Rev. 4
CENTA Antriebe Kirschey GmbH 36 / 52
 Mount the rubber element (1.1) with/without the ring (20; see installation
drawing) to the adapter (4):
 Mount the rubber element (1.1) with the ring (20):
 Push the ring (20) into the centring of the adapter (4).
 Push the rubber element (1.1) onto the centring of the ring (20).
 Screw the rubber element (1.1) and the ring (20) to the adapter (4) using
the screws (34) and the washers (35).
The ring (1.4) remains inside the rubber element (1.1) for later mounting.
 Mount the rubber element (1.1) without the ring (20):
 Push the rubber element (1.1) onto the centring of the adapter (4).
 Screw the rubber element (1.1) to the adapter (4) using the screws (34)
and the washers (35).
The ring (1.4) remains inside the rubber element (1.1) for later mounting.