CentraLine CLIOL824A - XS815 Cross Connectors; XAL10 Swivel Label Holders; XAL11 Swivel Label Holders; XS816 Bridge Connectors

CENTRALINE I/O MODULES – INSTALLATION & COMMISSIONING INSTRUCTIONS
EN1Z-0973GE51 R0119
50
XS815 Cross Connectors
Features
 For connecting the common terminals of all 6 relays of the
CLIOL824A and CLIOLR824A Relay Output Modules and
the CLIOLR825A Floating Output Module. This is
permitted when all six relays carry the same voltage
 Long, red
 Supplied with the terminal socket
Fig. 69. XS815 Cross Connector
XAL10 Swivel Label Holders
 Type: XAL10 Swivel Label Holder.
 Supplied with the terminal socket.
 For applying self-adhesive labels with application
information generated using the engineering tool to the
pluggable I/O modules.
 For use with standard commercially-available labels, e.g.,
AVERY 6572 or 6578
XAL11 Swivel Label Holders
 Type: XAL11 Swivel Label Holder.
 Supplied with the mixed I/O modules.
 For applying self-adhesive labels with application
information generated using the engineering tool to the
mixed I/O modules.
 For use with standard commercially-available labels, e.g.,
AVERY 5444, 5523, 8253, 16163, or 15513.
 Phased out.
XS816 Bridge Connectors
 Type: XS816 Bridge Connectors.
 Bridge connectors transmit both communication signals
and power supply between CentraLine I/O modules (exc.
CLIOP831A).
 Supplied with the terminal socket / mixed I/O modules
(exc. CLIOP831A).