CENTURION SYSTEMS R6 - Required Installation Tools

page 12 www.centsys.com
REQUIRED TOOLS AND EQUIPMENTSECTION 4
4. Required Tools and Equipment
FIGURE 3. REQUIRED TOOLS AND EQUIPMENT
Ratchet and
Socket set
(13mm and 17mm)
with extensions
Crimping tool
and Pin lugs
Steel and Masonry
Drill bits
Angle grinder
Hacksaw
Spirit level
Marking
pen/chalk
Extension cord
Soldering
iron
Safety equipment
(goggles, gloves, etc.)
Welding machine
(including consumables)
and safety equipment
Measuring
tape
G-clamps
(x2)
Electric Drill
Screwdrivers
6mm Phillips
3.5mm Flat
Hammer
Pliers