CENTURION SYSTEMS R6 - Collision Sensing Adjustment

page 45 www.centsys.com
COMMISSIONINGSECTION 8
FIGURE 58. GATE CLOSING
FIGURE 59. GATE OPENING
Adjust the settings on the control
card such that the gate(s) will open
and close reliabily, but not cause
damage to persons or objects in the
path of the gate.
Notethedierenceduringclosing
(Figure 58) and opening (Figure 59)
directions.
8.4. Collision Sensing Adjustment
On closing, the Motor stops
and reverses on hitting an
obstruction.
On opening, the Motor
stops (does not reverse) on
hitting an obstruction.