Supervisor Menus - Sleep, Delime Setup
Fig. 42 - Main screen
1. Press the SETTINGS button, "gears", (Fig. 42).
2. The Supervisor Menu appears, (Fig. 43)
3. Press the "SETUP OPTIONS" and the password
screen appears, (Fig.44).
4. Enter 7777 and ENT on the keypad (Fig. 45).
5. Setup Options screen appears.
6. Press the SLEEP button, (Fig. 46).
7. Press ON or OFF to enable/disable the option.
8. Press the number to enter a minimum of 1 hour
up to a maximum of 10 hours. Factory default
setting is 2 hours, (Fig. 47).
9. During normal operation, if the machine
is idle for the programmed time, then the
main screen displays, "SLEEP"
"TOUCH TO WAKE UP". Touch the screen
and the operation screen will reappear,
(Fig. 42).
10. The tank heaters and the detergent system
is disabled when the machine is asleep.
SLEEP
NOTE: Access to the supervisor menu is
active for ve minutes. The 7777 password
must be re-entered after 5 minutes.
Fig. 43 - Supervisor menu
Fig. 44 - Password screen
Fig. 45 - Keypad (Enter 7777 and ENT).
Fig. 46 - Press Sleep button Fig. 47 - SLEEP setup screen.
Fig. 48 - Main screen SLEEP display.
21
To Next Page
Loading...
Need help?
General
