APPENDIX A: Installing DH6000T Corner Splash Shield Kit P/N 901114
NOTE:
The corner posts may be predrilled and will not require the posts to be drilled as
described in Step 8.
39
8. Using the splash shield as a template, mark and drill two holes in the corner post.
Secure the shield to the post using the 10-32 screws, nuts and washers provided in the kit.
9. Open and close the doors to ensure there is no interference between the doors and shield.
10. Turn the dishwasher power on to ll the dishwasher.
11. The installation is complete.
Fig. 7
To Next Page
Loading...
Need help?
General
