Check Point QUANTUM MAESTRO - Page 102

Connecting Cables to MHO-175
Quantum Maestro Getting Started Guide|102
Explanations:
Item Description
1 Network 1 connected to ports on the Networking Device (3).
2 Network 2 connected to ports on the Networking Device (3).
3 Networking Device (router or switch) that connects your Network 1 and Network 2 to the
Quantum Maestro Orchestrators (10 and 12) with Bond interfaces (Link Aggregation).
4 Bond interface that connects Network 1 to the Quantum Maestro Orchestrators (10 and 12).
This Bond interface provides a redundant Uplink connection for the traffic inspected by the
Security Appliances in the applicable Security Group (31).
5 Bond interface that connects Network 2 to the Quantum Maestro Orchestrators (10 and 12).
This Bond interface provides a redundant Uplink connection for the traffic inspected by the
Security Appliances in the applicable Security Group (30).
6 A DAC cable, Fiber cable (with transceivers), or Breakout cable that connects a first slave of
the first Bond (4) on the Networking Device (3) to an Uplink port (in our example, Port 3) on the
first Quantum Maestro Orchestrator (10).
7 A DAC cable, Fiber cable (with transceivers), or Breakout cable that connects a second slave
of the first Bond (4) on the Networking Device (3) to an Uplink port (in our example, Port 3) on
the second Quantum Maestro Orchestrator (12).
8 A DAC cable, Fiber cable (with transceivers), or Breakout cable that connects a first slave of
the second Bond (5) on the Networking Device (3) to an Uplink port (in our example, Port 11)
on the first Quantum Maestro Orchestrator (10).
9 A DAC cable, Fiber cable (with transceivers), or Breakout cable that connects a second slave
of the second Bond (5) on the Networking Device (3) to an Uplink port (in our example, Port
11) on the second Quantum Maestro Orchestrator (12).
10 First Quantum Maestro Orchestrator.
11 A 100 GbE or 40 GbE DAC cable connected to the dedicated Synchronization ports 32 on the
Quantum Maestro Orchestrators.
Important - This connection is only used to synchronize the configuration of Security
Groups between the Quantum Maestro Orchestrators.
12 Second Quantum Maestro Orchestrator.