Ports
Quantum Maestro Getting Started Guide|45
Ports
This section described different hardware ports.
MGMT Ports
The RJ45 Ethernet ports with the label MGMT or provide access to the Gaia OS on the Quantum
Maestro Orchestrator.
By default, this port is configured with these settings:
n
IP address 192.168.1.1 and Net Mask 255.255.255.0
n
Auto-negotiation capabilities (100 MbE to 1 GbE)
Notes:
n
For more information, see the:
l
Quantum Maestro Quick Start Guide for MHO-175 and MHO-140
.
l
Quantum Maestro Quick Start Guide for MHO-170 and MHO-140
.
n
For more information, see the
Quantum Maestro Quick Start Guide for MHO-170 and MHO-140
.
n
In MHO-140, the second MGMT port is not configured with an IP address.
n
To change the default IP address:
1. Connect to the Quantum Maestro Orchestrator over the RJ45 console port.
2. Log in to Gaia Clish.
3. Configure the applicable IPv4 settings on the interface Mgmt1.
In MHO-140, the interface Mgmt2 is optional.
n
Make sure to use only FCC-compliant Ethernet cables.
To Next Page
Loading...
