Check Point QUANTUM MAESTRO - Page 172

Quantum Maestro Orchestrator Ports and Gaia OS Interfaces
Quantum Maestro Getting Started Guide|172
Second MHO-175 Quantum Maestro Orchestrator
Port
Number
on the
Front
Panel
Interface
Name
in Gaia OS
Port
Name
in Gaia OS
Port
Number
on the
Front
Panel
Interface
Name
in Gaia OS
Port
Name
in Gaia OS
1 eth2-Mgmt1 Port 2/1/1 17 dl65 Port 2/17/1
2 eth2-05 Port 2/2/1 18 dl69 Port 2/18/1
3 eth2-09 Port 2/3/1 19 dl73 Port 2/19/1
4 eth2-13 Port 2/4/1 20 dl77 Port 2/20/1
5 eth2-17 Port 2/5/1 21 dl81 Port 2/21/1
6 eth2-21 Port 2/6/1 22 dl85 Port 2/22/1
7 eth2-25 Port 2/7/1 23 dl89 Port 2/23/1
8 eth2-29 Port 2/8/1 24 dl93 Port 2/24/1
9 eth2-33 Port 2/9/1 25 dl97 Port 2/25/1
10 eth2-37 Port 2/10/1 26 dl113 Port 2/26/1
11 eth2-41 Port 2/11/1 27 dl117 Port 2/27/1
12 eth2-45 Port 2/12/1 28 dl121 Port 2/28/1
13 eth2-49 Port 2/13/1 29 dl125 Port 2/29/1
14 eth2-53 Port 2/14/1 30 dl129 Port 2/30/1
15 eth2-57 Port 2/15/1 31 dl133 Port 2/31/1
16 eth2-61 Port 2/16/1 32 eth2-Sync Port 2/32/1
Table: Second MHO-175 ports and interfaces
Notes:
n
When you connect two Quantum Maestro Orchestrators MHO-175 for redundancy, Gaia OS
shows:
l
eth1-XX and Port 1/X/X for the first Quantum Maestro Orchestrator.
l
eth2-XX and Port 2/X/X for the second Quantum Maestro Orchestrator.
n
The tables above show the default configuration before you connect breakout cables.
After you connect breakout cables to the upper ports, you get four additional interfaces starting
from the original interface name.
n
It is possible to configure Port 1 only as management or as downlink.