Quantum Maestro Orchestrator Ports and Gaia OS Interfaces
Quantum Maestro Getting Started Guide|174
Second MHO-170 Quantum Maestro Orchestrator
Port
Number
on the
Front
Panel
Interface
Name
in Gaia OS
Port
Name
in Gaia OS
Port
Number
on the
Front
Panel
Interface
Name
in Gaia OS
Port
Name
in Gaia OS
1 eth2-Mgmt1 Port 2/1/1 17 dl33 Port 2/17/1
2 eth2-Mgmt3 Port 2/2/1 18 dl35 Port 2/18/1
3 eth2-05 Port 2/3/1 19 dl37 Port 2/19/1
4 eth2-07 Port 2/4/1 20 dl39 Port 2/20/1
5 eth2-09 Port 2/5/1 21 dl41 Port 2/21/1
6 eth2-11 Port 2/6/1 22 dl43 Port 2/22/1
7 eth2-13 Port 2/7/1 23 dl45 Port 2/23/1
8 eth2-15 Port 2/8/1 24 dl47 Port 2/24/1
9 eth2-17 Port 2/9/1 25 dl49 Port 2/25/1
10 eth2-19 Port 2/10/1 26 dl51 Port 2/26/1
11 eth2-21 Port 2/11/1 27 dl53 Port 2/27/1
12 eth2-23 Port 2/12/1 28 dl55 Port 2/28/1
13 eth2-25 Port 2/13/1 29 dl57 Port 2/29/1
14 eth2-27 Port 2/14/1 30 dl59 Port 2/30/1
15 eth2-29 Port 2/15/1 31 dl61 Port 2/31/1
16 eth2-31 Port 2/16/1 32 eth2-Sync Port 2/32/1
Table: Second MHO-170 ports and interfaces
Notes:
n
When you connect two Quantum Maestro Orchestrators MHO-170 for redundancy, Gaia OS
shows:
l
eth1-XX and Port 1/X/X for the first Quantum Maestro Orchestrator.
l
eth2-XX and Port 2/X/X for the second Quantum Maestro Orchestrator.
n
The tables above show the default configuration
before
you connect breakout cables.
After you connect breakout cables to the upper ports, you get
four
additional interfaces starting
from the original interface name.
n
It is possible to configure Port 1 and Port 2 only as management or as downlink.
To Next Page
Loading...
