LEDs
Quantum Maestro Getting Started Guide|33
System Status LED Behavior
LED
Behavior
Instructions Action Required
Steady
green
The Orchestrator is up and
running normally.
None.
Flashing
green
The Orchestrator is booting
up.
Wait for up to five minutes for the end of the booting
process.
Steady red Major error occurred.
For example, the Orchestrator
overheated, has a corrupted
firmware, there is a CPU error.
Check environmental conditions (room
temperature).
It may take up to five minutes to power on the
Orchestrator.
If the System Status LED is lit steady red for five
minutes after you started the Orchestrator, unplug
the Orchestrator and contact
Check Point Support
.
Flashing for
more than
five minutes
Software did not boot properly,
and only firmware is running.
Connect to the Orchestrator through the console
port and check the software status.
To Next Page
Loading...
