Check Point QUANTUM MAESTRO - Page 80

Mounting the Quantum Maestro Orchestrator MHO-140 and MHO-170 in a Rack
Quantum Maestro Getting Started Guide|80
Important:
n
After you insert a power cable and confirm the System Status LED is lit in
steady green color, make sure that the Fan Status LED is also lit in steady
green color.
n
If the Fan Status LED is not green (see "Fan Status LED" on page34 ):
1. Unplug the power cable.
2. Make sure that the mating connector of the fan unit is free of any dirt
and obstacles.
3. Make sure that the fan unit is inserted properly.
If no obstacles were found, and the problem persists, contact Check
Point Support .
Step 8: Logging in to the Gaia OS
Log in to the Quantum Maestro Orchestrator (Gaia Portal or Command Line) with these default
credentials:
n
Username - admin
n
Password - admin
See the Quantum Maestro Quick Start Guide in the shipping carton.
Best Practice - Change the default password.
Note - There is no Gaia First Time Configuration Wizard on Quantum Maestro Orchestrators.