CHINT NVF2G-S Series - Page 106

F9 group process PID control group
F9.00
F9.01
F9.02
F9.03
F9.04
F9.05
F9.06
F9.07
F9.08
F9.09
F9.10
F9.11
F9.12
F9.13
F9.14
F9.15
0: digital given
1:AI1
2: AI2
3: reserved
4: reserved
5: reserved
6: Multi-segment instruction given
0:AI1
1:AI2
2: reserved
3:AI1+AI2
4:AI1-AI2
5:MIN(AI1,AI2)
6:MAX(AI1,AI2)
7: reserved
8: reserved
(0.0 ~ 100.0)%
0.0 ~ 100.0
0.01 ~ 10.00
0.000 ～ 10.000
(0.01 ~ 50.00)s
(0.00 ~ 650.00)s
(0.00 ~ 60.00)s
(0.00 ~ 60.00)s
(0.0 ~ 100.0)%
(0.00 ~ 100.00)%
(0.00 ~ 100.00)%
(0.00 ~ 100.00)%
0: The closed-loop output is negative, and the
inverter runs at the lower limit frequency
1: The closed-loop output is negative, and the
inverter runs in reverse
0: positive direction
1: Reverse direction
1
1
50.0%
20.0
2.00
0.000
0.50s
0.00s
0.00s
0.00s
0.0%
0.10%
1.00%
1.00%
0
0
given channel selection
Feedback Channel Selection
Given quantity digital setting
Proportional gain KP
Integral gain Ki
Differential gain Kd
The sampling period
given change time
Feedback filter time
output filter time
deviation limit
differential clipping
Maximum positive deviation
between two outputs
Maximum reverse deviation
between two outputs
Closed-loop output reversal
selection
Closed-loop regulation c
haracteristics
F8.32
F8.33
F8.34
F8.35
F8.36
F8.37
F8.38
0: invalid
1: effective
(0.0～6500.0)min
(0.0 ～ 6500.0)min
0: invalid
1: effective
(0.0 ~ 10.0)s
0: run at the lower limit frequency
1: Deceleration to stop
0: invalid
1: effective
Timing function selection
Timing run time
Set the cumulative running time
(used with relay RO)
Power failure restart function
selection
Waiting time for restart after
power failure
The set frequency is lower than
the lower limit frequency
operation mode
jogging preference
0
0.0min
0.0min
0
0.0s
0
1
function
code
name
Parameter Description
Defaults
Change
098
NVF2G-S Series Inverter User's Guide