When multiple frequency converters are installed obliquely, it must be ensured that the air duct on the air
inlet side of the inverter is separated from the air duct on the air outlet side to avoid mutual influence , as shown
in Figure 2.3:
Figure 2.3 Inclined installation of multiple frequency converters
note： Since the inverter itself generates a lot of heat, when it is installed in a cabinet, the cabinet should have good
heat dissipation conditions.
Hot Wind
Cold Wind
Hot Wind
Cold Wind
Hot Wind
Cold Wind
005
NVF2G-S Series Inverter User's Guide
To Next Page
Loading...