Chroma 63200 Series User Manual

xi
Feb. 2012
2.4
Add the following:
− “Parallel Setting” in the chapter of “Installation”
− “External LOAD ON/OFF Control” in the chapter of ”Operation
Overview”
− “Troubleshooting” and “Precautions for Loading 63200 Battery”
two chapters
Update the following:
− Detail specifications and descriptions in “Specification” section
− Front and rear panel descriptions
− Standard accessories
Oct. 2012
2.5
Add the following:
− Timeout setting to Battery
− Recall Default function
− SHORT KEY: ENABLE/DISABLE function
Modify the following:
− Minimum setting to 0V in CV Mode
− External ON/OFF to support all Modes and Programs
− 63202 specifications to upgrade to 600V
− Copyright text from “CHROMA ATE Inc.” to “Chroma ATE Inc.”
− List of accessories
Jun. 2013
2.6
Add the following:
− 63211 CE Declaration of Conformity
− Specification for 63211
− Accessory for 63211
− Dimension for 63211
− “Maintenance & Cleaning” & “Calibration & Verification”
sections in
the chapter of “Installation”
− 63211 parallel usage
− 63211 has no surge capability
− “Verification” chapter
Modify the following:
− 63200 Series Verification
− 63201~63210 CE Declaration of Conformity
Feb. 2014
2.7
Add a new model 63212.
Jun. 2014
2.8
Add the following in the chapter of “Operation Overview”:
− Notice of Von time delay specification in the section of “Von
Protection.”
− Note in the section of “CR Offset Error Compensation.”
Modify the CURSOR EDIT description in the section of “
Online Change
Level” under the chapter of “Local Operation.”
Add TIMEOUT function for Firmware version 2.50 or above for all
models in the entire series.
Update the appendix of “List of Functions & Mapped F/W Versions.”
Sep. 2015
2.9
Modify CR mode specification.
Update “Hardware Requirements” in the chapter of “Verification.”

Chroma 63200 Series Specifications

General

Brand	Chroma
Model	63200 Series
Category	Test Equipment
Language	English