Programmable DC Electronic Load 6310 Series Operation & Programming Manual
Select sync. parallel mode. Set the mainframe if to sync. in parallel run. The 6330 series
have a master/slave paralleling control mode that allows synchronous load control in static
and dynamic loading mode.
SYNC. PARALLEL
1 : ON 2 : OFF
Select Master / Slave mode. Set the specified mainframe to master or slave for sync. in
parallel run.
MASTER / SLAVE SEL
1 : MASTER 2 : SLAVE
Select sync. parallel channel mode. Set the specified channel to T1 & T2 in sync dynamic
mode for parallel loading.
SYNC. PARALLEL
CHANNEL SEL: 1 TO 8
Display the versions of load module & mainframe.
LOAD MODEL 63301
Version: 3103
Press ▼ key.
FRAME BOOT PROG.
Version: 1.40
Press ▼ key.
FRAME DOWN PROG.
Version:
1.21
Press ▼ key.
FRAME EXEC PROG.
Version: 1.41
4-14
To Next Page
Loading...
Need help?
General
