Cimbali M26 - Before You Start; During Operation

English
7 EN
BEFORE YOU START
Groups
• +RRNXSWKH¿OWHUKROGHUVWRWKHJURXSVZLWKRXWFRႇHH
• Let each group dispense water for about a minute.
Hot Water
• DT version with display. Run the water replacement as indicated in the section "Changing the
ZDWHU LQ WKH ERLOHU".
• C version / DT version without display. Continuously dispense hot water (pressing the
appropriate button) until at least 5 liters of water have been used for a machine with 2 groups,
and 8 liters for a machine with 3 groups.
See the “Hot water dispensing” chapter in the User’s Manual.
Steam (also with Turbosteam)
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
DURING OPERATION
Steam dispensing (also with Turbosteam)
• Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds and
let the steam escape so that condensation is eliminated.
&RႇHHGLVSHQVLQJ
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 100 cc and discard the liquid.
Hot water dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 200 cc and discard the liquid.
&OHDQLQJWKHFRႇHH
• 3OHDVHUHDGWKHVSHFL¿FVHFWLRQLQWKHXVHU¶VPDQXDOWROHDUQKRZWRFOHDQWKHVHFLUFXLWV
WARNING: BEFORE YOU START OPERATING THE MACHINE, WASH THE
INTERNAL COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED
BELOW.
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE MA-
CHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.
6. Prescrizioni per l’operatore6. Rules for the worker operating the machine
02_M26_UNICO_EU_2314.indd 7
02_M26_UNICO_EU_2314.indd 7
07/04/2023 12:04:54
07/04/2023 12:04:54