Cimbali M26 - Page 63

2a
17a
A
MILK 4
2a
17a
A
MILK 2
English
17 EN
+HDWLQJPLONIRUIURWK\FRႇHHFDSSXFFLQR
General indications
Milk is a delicate biological product and can easily
GHWHULRUDWH+HDWPRGL¿HVLWVVWUXFWXUH0LONPXVWEHNHSW
at a storage temperature no higher than 5°C (41°F) from
the moment the container is opened and throughout its
entire period of use. Our storage appliances are suitable
for this purpose.
NOTE: at the end of the work day (or not more than 24
hours from the time the container is opened),
any remaining milk must be discarded.
Dispensing with the Turbosteam selector (2a)
(where applicable)
Machines equipped with the TURBOSTEAM (STOP
STEAM) dispensing system have the "stop steam dispensing
ZKHQ VHW WHPSHUDWXUH LV UHDFKHG" function, and can rapidly
heat and froth milk.
7KH 7XUERVWHDP VHOHFWRU NH\V KDYH GLႇHUHQW IXQFWLRQV
DFFRUGLQJWRWKHIROORZLQJFRQ¿JXUDWLRQ
MILK 2 MILK 4
IURWKHGPLON
KHDWHGPLON
heated milk.
IURWKHGPLONORZIURWK
frothed milk (medium
IURWK
frothed milk (high
IURWK
Insert the steam nozzle (17a) into a suitable container,
making sure the bulb is completely immersed in the milk.
Choose the type of milk you prefer and press the related key.
Once the set temperature has been reached, steam
dispensing will stop automatically.
Dispensing can be interrupted at any time by pressing any
Turbosteam selector key (2a).
16.1 Dispensing with the Turbosteam selector (2a) (where applicable)
Scalding hazard! Use the appropriate
insulating devices (A) to move the water and
steam nozzles.
Cleaning of steam dispensing pipes
At the conclusion of each steam dispensing
phase:
- Using a clean sponge, wash with hot water
removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as
follows:
Turn the nozzle towards the cup tray and
carefully activate steam dispensing at least
once.
02_M26_UNICO_EU_2314.indd 17
02_M26_UNICO_EU_2314.indd 17
07/04/2023 12:05:08
07/04/2023 12:05:08