If your TV has standard RF or AV inputs:
1 Connect the supplied RF cable from the DVD+VCR to your TV as shown.
OR
Connect the supplied audio/video cables from the DVD+VCR to your TV as shown.
2 Connect the supplied power cable from the DVD+VCR to a standard wall outlet.
3 Press POWER to turn on the DVD+VCR.
4 Turn on your TV and set it to channel 3 or 4 (for the RF connection) or the appropri-
ate Video input (for the AV connection).
• The CineVision splash screen appears.
5 Continue with Chapter 3 to set up your DVD+VCR.
NOTE:
• If your TV has S-Video or Component Video inputs, see page 16.
• To change the RF Out channel to 3 or 4, see page 24.
2 - Connections
To Next Page
Loading...