39
Timer Recording
Setting a Timer Recording
Follow these steps to program a timer
recording. Before you begin, make sure
the Time and Date are set correctly (see
page 22), and that your tape has enough
available space to record the desired
program.
1 Insert a recordable tape (a tape with
the record safety tab intact).
2 Press VCR to control the VCR deck.
3 Press PROG. to display the Timer
Record menu.
• You can also press SETUP and select
Timer Recordings > Make a New
Program.
4 Press and ENTER to set how
often to record:
One Time - Record once.
Daily - Record at the same time every
day.
Weekdays - Record at the same time
Monday through Friday.
Weekly - Record once a week on the
selected day and time.
5 Use the CH+/- or 0-9 buttons to select
the channel you want to record and
press
.
• If you are using a cable box/satellite
receiver, set the DVD+VCR to the
receiver’s output channel and select
the channel to record on the cable
box/receiver.
• If you are recording from an exter-
nal source, press TV VIEW to select
the rear (Video1) or front (Video2)
input.
To Next Page
Loading...