Circutor DHC-96 Aac - Page 14

Table 6 (Continuation) : Display menu�
Display menu
F
50.00
Frequency
di
12
Status of digital inputs:
1, status of the digital input 1: ashes when the input is activated
2, status of the digital input 2: ashes when the input is activated
do
12
Status of the relay outputs:
1, status of the relay output 1: ashes when the relay is activated
2, status of the relay output 2: ashes when the relay is activated
If the current value measured by the device is higher than a % of the nominal value, the device
can make the digits on the display start ashing, in the form of a light alarm. See “5.6.3.- LIGHT
ALARM”
14
DHC-96 Aac
Instruction Manual