Circutor DHC-96 Aac - 5�2�- Rs-485 Communications; 5�2�1�- Modbus Address

5.2.- RS-485 COMMUNICATIONS
Figure 12, shows the main screen of the communications menu, where the parameters of the
RS-485 communications are congured.
Conn
--
Figure 12: RS-485 communications menu, main screen�
Press the key to open the conguration menu.
Conn
Addr
0001
bAUd
9600
dAtA
n.8.1
--
Figure 13:RS-485 communications menu
5�2�1�- MODBUS ADDRESS
This screen is used to congure the modbus address of the device.
Addr
0001
Use the , key to modify the value of the ashing digit
When the desired value is shown on the screen, press the key to skip the digit.
Minimum conguration value: 1
Maximum conguration value: 247.
To validate the data, press the key.
Use the and keys to browse the conguration screens of the menu.
20
DHC-96 Aac
Instruction Manual