Circutor DHC-96 Aac - 5�1�2�- Units of the Primary Current; 5�1�3�- Secondary Current

point. Use the to modify the decimal point.
Minimum conguration value: 0.
Maximum conguration value: 9999.
To validate the data, press the key.
Use the and keys to browse the conguration screens of the menu.
5�1�2�- UNITS OF THE PRIMARY CURRENT
This screen is used to congure the units of the primary current.
Unt. i
oFF
Use the ,key to browse the different options:
oFF, the unit of the primary current is A.
on, the unit of the primary current is kA.
To validate the data, press the key.
Use the and keys to browse the conguration screens of the menu.
5�1�3�- SECONDARY CURRENT
This screen is used to congure the value of the secondary current.
in 2
5.000
Use the and keys at the same time to congure the value.
Use the ,key to browse the different options:
5.000, for the current scale of 0 ... 5 A.
1.000, for the current scale of 0 ... 1 A.
To validate the data, press the key.
Use the and keys to browse the conguration screens of the menu.
18
DHC-96 Aac
Instruction Manual