Need help?Do you have a question about the Cirris Easy-Touch Pro and is the answer not in the manual?
General| Model | Easy-Touch Pro |
|---|---|
| Continuity | Yes |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Memory | Internal storage for test programs and results |
| Test Types | Continuity |
| Display | Color LCD |
| Interface | Ethernet, USB |
| Resistance Measurement Range | 0.1 Ω to 1 MΩ |
| Dimensions | Varies depending on configuration |
| Weight | Varies by configuration |
| Type | Cable and Harness Test System |
Warning about potential electric shock during Hipot testing and medical device contraindications.
Instructions on how to install additional scanners to increase test point capacity.
Steps for connecting power and preparing the tester for operation.
Step-by-step guide to enabling optional features using a feature key provided by Cirris.
Explains two security types: Windows System Security and Easy-Wire Software Security.
Detailed steps for creating user logins, setting passwords, and managing security settings in Easy-Wire.
Description of different Cirris adapter types: Standard, High Voltage, Custom, and Replaceable.
Instructions for installing adapters into the scanner positions, noting sequential order.
Steps to set commonly used adapters as 'Default' for streamlined test program creation.
Guide on how to create a test program by 'learning' a sample cable using the Easy-Wire software.
How to verify, add, delete, or edit instructions in a test program after learning a cable.
Procedure for running tests on a Device-Under-Test (D.U.T.) after program setup.
To Next Page
